HOW TO REPLACE A DISHWASHER PUMP CODE

The drain pump forces water through the drain hose. How much is a drain pump for a Frigidaire dishwasher?

HOW TO REPLACE A DISHWASHER PUMP CODE

If component tested fails, error code will be displayed in digital display. To advance through test(s), press Start/Cancel. See the 'Cleaning the fi lter' section to remove the cylindrical micro fi lter. To activate water test mode on your Frigidaire dishwasher, press and hold Start/Cancel and heating option (High-Temp Wash, Sanitize, Air Dry, or No Heat Dry) (depending on model) for 3 seconds. If the dishwasher fails to drain because the drain pump is clogged with foreign matter or there is an abnormal noise coming from the drain pump, you must unclog and clean the drain pump as instructed below. How do you run a diagnostic test on a Frigidaire dishwasher? How do I force my Frigidaire dishwasher to drain? Rethread the screws to secure the mounting brackets to the cabinet, countertop, or floor. If the drain pump runs but doesnвЂ™t pump water and the drain path is clear, then the drain pump is likely bad. Once the new pump motor has been installed, you will need to reinstall the dishwasher: Confirm the end of the drain hose is accessible through the hole in the cabinet wall then slide the dishwasher back into the cabinet. If your dishwasher has a timer, turn the timer dial to the drain portion of the cycle to run the drain pump. How do I know if my dishwasher drain pump is working? You are testing for continuity and should receive a reading of zero or nearly zero. Once you have removed it, using a multimeter on Rx1 mode, touch the pumpвЂ™s terminals with the probes. It likely will be found behind the lower access panel.

How do I test my dishwasher drain pump continuity?

Drain pumps are not repairable-if the drain pump is defective, you must replace it. If the motor does not have continuity, or if is getting power but wonвЂ™t run, replace the drain pump. To determine if the drain pump is defective, check the pump motor for continuity using a multimeter.

How to replace a dishwasher pump